俄罗斯GOST认证、RTN认证、乌克兰认证中心、上海经合工业中国唯一授权机构! 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息
您当前位置:首页 > 最新法规

俄罗斯计量认证,计量型式批准证书,俄罗斯测量工具形式批准证书,Metrological certificate

 测量设备(以下简称ME)认证由联邦技术法规和计量局(Rosstandard)制定和批准。
 
计量认证(ME),测量仪器或设备进入俄罗斯使用前必须在联邦技术法规和计量局(Rosstandard)测试和批准决定的情况下,确保测量的一致性的在(ME的国家注册)。制造商(申请方)随后获得批准计量仪器/测量装置计量型式批准证书,附带说明。
 
计量型式批准证书表明测量设备完全符合国家规定的要求。这也表明计量仪器/测量装置(ME)适合在俄罗斯联邦法规管辖的地区使用。
 
计量型式批准证书型式认可程序包括几个步骤:
 
根据俄罗斯工业和贸易部法规2009年11月30日第1081号令(要求1,第3节)的要求进行测量设备的批准测试;
根据联邦法规MIT-3290-2010的要求组织测试材料;
根据俄罗斯工业和贸易部法规2009年11月30日第1081号令(申请2和3)的要求,按Rosstandard标准检验文件批准型式认可证书。
生产商、申请方或授权人员应根据法规MIT 3290-2010填写的申请。
 

要求资料:国内计量注册证书(计量型式批准)
 -  计量校准手册(俄文翻译)

-俄文说明书(描述,安装,操作,维修,俄文翻译)。

-国内计量证书和测试 报告(俄文翻译)

-产品图纸总装图(俄文翻译)

-两个产品图片13x18厘米,以及照片清楚地显示序列号

-出厂测试报告--测试材料产品在出厂前(在制造商的语言和俄语)

-产品介绍宣传彩页(俄文)

-校准间隔(俄文)

-校准手册(需要批准的文件)

-ISO9001体系证书

2、认证时间:6-8个月


Metrological certificate

An approval of measuring equipment (hereinafter referred to as ME) was created by the Federal Technical Regulation and Metrology Agency (Rosstandard).

A number is assigned to the ME and an order about its entry in the Federal information corpus on assurance of uniformity of measurements (The State Register of ME) is issued in the case of an affirmative decision of the Rosstandard. The Manufacturer (applicant party) then gets a certificate for the approval of the ME type with an enclosed description.

The document indicates a full conformity of measuring equipment with the requirements established by the State. It also indicates that the ME is suitable for usage in areas governed by regulation.

The type approval procedure includes several steps:

  • Carrying out tests to approve Measuring Equipment in accordance with the requirements of the Order No. 1081 of the Russian Ministry of Industry and Trade of 30.11.2009 (Application 1, Section 3);
  • Organization of test materials checked in accordance with the requirements of the MIT-3290-2010;
  • Inspection of documentation by the Rosstandard, receipt of the Certificate on approval of type in accordance with the requirements of the Order No. 1081 of the Russian Ministry of Industry and Trade of 30.11.2009 (Application 2 and 3).

The producer, applicant party, or authorized person should forward an application filled according to MIT 3290-2010.

The applicant party should submit the following documentation for carrying out of measuring equipment tests to approve the type:

  • sample or samples of the ME,
  • technical conditions signed by the head of development center (if their development is provided);
  • operation manual
  • The ME passport (registry card).